Unboxing Your Cradlepoint: A Complete Guide to Cradlepoint Setup

There is no doubt that getting your Cradlepoint router up and running is smooth and seamless. Cradlepoint routers are especially built for hassle-free home internet connectivity and robust performance. Due to its streamlined Cradlepoint Setup and intuitive interface, you can quickly configure your device and establish a secure connection. Therefore, this guide elaborates on the key facets of the router setup from unboxing to establishing secure connections. So, if you are an existing or new Cradlepoint user, stay on this page and read the guide till the end.

What You'll Need For the Cradlepoint Setup?

Indeed, there are some things it is useful to read before you start setting up your Cradlepoint router. With all these key items, you can smoothly perform the Cradlepoint router setup process. Have a look at the key things you need to complete this setup process seamlessly.

How To Setup Cradlepoint Step-by-Step?

Now that you have everything ready, proceed with the step-by-step Cradlepoint Router setup. However, knowing the available ways to configure your router is a milestone in a seamless setup process.

Generally, you can access and configure your device over a local and remote network. Moreover, you will learn advanced options like Cradlepoint Dynamic DNS Setup, to maintain consistent access to your router. Follow these instructions carefully to get your device fully configured and connected to the internet.

Initial Setup

Primarily, unbox your router and take out all the included accessories.
Now, look around and find an appropriate location to place your router.
Next, attach the antennas to the ports on the back side of the router via Ethernet cables.
After that, insert the SIM Card into the respective slot and make sure it is properly inserted.
Further, use the compatible power adapter and power on your router.
Press the power button (on the back or side of the router) to turn it on.
Then, you will see an LED indicating the device is ready to use.
Further, connect your computer to the router either through a wired or wireless connection.
Next, access your router admin panel via 192.168.0.1 and log in using the default credentials.
After that, select your Time Zone, region, Internet Connection, and other settings.
Now, you can go ahead with the Cradlepoint Setup for advanced settings.

Cradlepoint Router Setup

Initially, power on your networking device.
Then, ensure that your computer has the required 2.4 GHz network.
Now, open any web browser and navigate to cradlepointecm.com.
After that, log in using your valid email and password.
Further, you will reach the NetCloud dashboard.
Then, go to the Groups from the navigational panel and select a group.
Next, visit Configuration and tap Edit.
Here, go to Networking>Local Network, then select the WiFi Radio #!1 (2 GHz) or #2 (5 GHz).
Next, select any wireless access point and click edit to change its SSID and password.
Further, to prevent the router from broadcasting the SSID, select the hidden checkbox.
Now, select “Isolate” to prevent your wifi clients from communicating over the wireless network.
Similarly, you can enable your SSID broadcasting over the wireless network.
Then, select the WPA-Personal mode in the security mode drop-down list.
After that, set a WPA password to secure your device and network.
Now, follow the on-screen instructions to complete the Cradlepoint Setup.

Note: You can also enable or disable the WiFi from the Netcloud manager. Moreover, you can change the wifi channels on the router. Simply, go to Channel Selection Method>User Selection, and select the desired channel.

How to Perform the Cradlepoint Dynamic DNS Setup?

Generally, DNS (domain name system) helps in translating domain names and IP addresses. Additionally, it helps in host configuration, split DNS, and configuring other DNS settings. To configure the DNS settings on your Cradlepoint router, follow these steps:

First of all, log in to your NetCloud manager via cradlepointecm.com web GUI.
Then, go to Devices and select your router.
Further, go to Groups and select a preferred group.
After that, navigate to Configuration and scroll down to Networking.
Now, go to the DNS server and select “Enable Dynamic DNS”.
Hereon, visit Server Type and tap on DynDNS.
Fill in the required information in the corresponding fields.
Finally, tap “Save” and “Commit” to apply these changes.
Ultimately, the Cradlepoint Dynamic DNS Setup is completed.

In short, you have now learned the quick cradlepoint setup by following this guide. Drop by or contact our professionals via the chat box for further details!

FAQs

Can I set up Cradlepoint as an access point?

Yes, you can access and configure the Cradlepoint routers as a wireless access point. This helps in extending the wireless network range, especially while using the DHCP gateway services.

How to perform the Ericsson Cradlepoint NetCloud setup?

For the NetCloud setup, you can either use NetCloud Manager and log in using valid credentials. Initially, go to the 192.168.0.1 IP address in the address bar. Furthermore, go to System>NetCloud, and register your router.

Why perform the Cradlepoint VPN setup?

Usually, the Cradlepoint VPN setup helps in enhancing the network security, connectivity, especially for remote working or in the branch office environments.